Journal of Health and Safety at Work
Year:2015 | Volume:5 | Issue:2|Papers Count:8

Introduction: High-rise building projects are increasing due to the population growth, urban development, and migration of people to the major cities. High-rise buildings have special importance in terms of HSE risks rather than other projects since these projects are located in the cities and in the direct contact with people. However, in most incidents and events, organizations do not have enough insight into the true cost. Therefore, identification and assessment of management of HSE risks is essential.Material and Method: In this research, HSE risks in high-rise buildings that have harmful effect on human health and environment were identified, assessed and ranked. The Risks were identified and assessed through checklist and interview with experts. Considering the uncertainty and the ambiguous nature of the risks, the combination of fuzzy numbers and Analytical Hierarchy Process (AHP) method were employed for quantitative analysis. Finally, the estimated risks were ranked for control.Result: Using AHP Method, the weight of health, safety, and environment were obtained 0.346, 0.3, and 0.354, respectively, which shows the higher importance of environmental and health risks in construction projects comparing to safety risks.Conclusion: Findings in this research indicated that HSE risks are very critical and they should be controlled before start of the project. Moreover, many of HSE risk are due to lack of appropriate HSE culture in the organization and projects that can be reduced by culture-building practices.

Introduction: Each year tens of millions of labors are victims of occupational incidents leading to the disablement or death of many of them. The present study has been conducted with the aim of predicting the performance monitoring indicators of incident after implementation of the integrated management system in order to reduce number of incidents, safety monitoring, and giving priority to safety programs in the organization policies.Material and Method: Using safety performance indicators, this descriptive-analytical study has been done in two stages in a combined cycle power plant on 254 incidents before the implementation (2004) and the years after the implementation of integrated management systems (a seven year period). The required data was gathered through checklist and interview with the injured workers. Kolmogorov-Smirnov, Chi Square, and Cubic regression tests were utilized for data analysis at significance level of 0.05.Result: Of the 1131 labors during a seven year period, 254 occupational incidents were recorded. The highest value of accident frequency rate was in 2004 (32.65) while the highest accident severity rate was in the year 2008 (209). Moreover, the lowest frequency rate and severity rate were related to the year 2011 with value of 9.75 and 29.26, respectively. Regression graphs, between the observed values and the estimated values, showed that the coefficients of all the indicators, except for b1of ASR, are significant (P<0.05) as expected. This result implies the improvement in the safety performance and integrated management systems.Conclusion: Findings show that Cubic regression can be an appropriate to olforinvestigating the indicators trends and for their predictionin planning and monitoring the performance of safety unit; so that the decision making for determining the priority of organizations’ safety programs would be facilitated.

Introduction: According to previous researches, working at the airport is one of the most vociferous jobs in the world. Airport workers are at risk of noise induced hearing loss. The present study was done to evaluate the Sound Pressure Level (SPL) in the closest aprons to Ground Safety department at Mehrabad airport and to investigate the effect of airport noise on the employees of this department.Material and Method: Evaluation of SPL in the given aprons was done using sound meter and sound analyzer. Measurement stations at specific intervals to the sound source were identified inside and outside of the participants ‘workplace and SPL was measured at night and day. The mean estimated values were compared with those presented by Ministry of Health. The annual participants’ audiometry information was extracted from medical records. Then a self-administered questionnaire was distributed among the study sample in order to measure quality of noise exposure. The questionnaire was developed based on three general criteria including the knowledge toward the noise pollution, job satisfaction, and the exposure to the noise source; and the purpose of this questionnaire was to find the relationship (correlation) between these parameters among the study population.Results: The measured equivalent for 8 hours noise exposure was obtained 94 dB (A) and no relation was observed between octave band sound of aircraft and recorded audiometry. Analysis of the questionnaire showed that people with more knowledge about noise pollution used more hearing protective equipment. Subsequently, by using more hearing protection equipment the level of hearing loss was reduced significantly (P<0.05). There was a significant and negative correlation between noise exposure and job satisfaction, as well (P<0.05). Also there was a significant and negative correlation between using of ear muffs and catching Noise-Induced Hearing Loss (P<0.1). The percentage of noise-induced hearing loss was calculated 51.4% among study sample.Conclusion: The noise exposure of employees of Ground Safety working in Mehrabad airport was higher than the permissible limit which implies the necessity for use of earmuffs and implementation of noise reduction programs.

Introduction: Safety signs provide information, related to hazards or dangers in the industry, in form of instructions. These signs are effective as long as they are designed in accordance with principles of ergonomics and design cognitive features. The purpose of this present research was to study the relationship between cognitive features of signs and ability to guess, and to develop the relevant regression model.Material and Method: This descriptive cross-sectional study was carried out on 100 employees in a petrochemical industry complex. A three part questionnaire was used to collect required data; while first part of the questionnaire dealt with demographic information, second part included cognitive features of signs designand the third part proceeded on testing the ability to guess. Then, a regression model was developed to determine the relationship between cognitive features, and the ability to guess.Result: Mean and standard deviation obtained for the ability to guess the total study signs were 63.73 and 4.36, respectively. The feature of “familiarity” obtained the lowest possible score (49.15). The “semantic closeness” (b=0.390) and “meaningfulness” (b=0.369) had the highest correlation with the ability to guess safety signs.Conclusion: According to results of this study, use of principles of ergonomic design of signs and training are necessary to promote the ability to guess the safety signs to the minimum available standards. Therefore, it is possible to balance cognitive features especially “familiarity”, with the lowest score, and “meaningfulness” and “semantic closeness”, with the highest influential relationship with the ability to guess of signs. The developed regression model for this industry can be used to predict the ability to guess of safety signs in future studies.

Introduction: The bank employees usually require the use of computers for long duration in a static position to get the work done. The present study aimed to evaluate the risk factors for musculoskeletal disorder using the ROSA method among the employees of Sepah Bank. An ergonomic intervention was also performed in order to improve the working conditions.Material and Method: This interventional descriptive-analytical study was carried out among 165 office employees of central building of Sepah Bank. Using random sampling, the subjects were initially divided into two groups of case and control. Before and after the intervention, ROSA method and Nordic questionnaire was respectively used to evaluate the risk factors that cause musculoskeletal disorders and the prevalence of musculoskeletal disorders. The data were collected two weeks prior the interventions and 9 months after the interventions. SPSS software version 16 was utilized for data analysis and the effectiveness of intervention was determined.Result: Before the intervention, the mean ROSA scores of all groups’ workstations were above 5 with high risk. The results obtained 9 months after the interventions manifested a statistically significant decrease (P<0.001) in the ROSA mean scores and its components in the groups who received the interventions. 9 months after the intervention, the prevalence of musculoskeletal disorders among the subjects who had received intervention showed a significant reduction, as well (0.001> p).Conclusion: Using the ROSA technique was seemed to be beneficial to assess the ergonomic risk factors of office works, and the deficiencies in the workstation can be identified through this method. Moreover, by design and implementation of an educational intervention program along with engineering interventions which comply with the elements of this technique, the defects can be eliminated.

Introduction: Polycyclic aromatic hydrocarbons (PAHs) are one of the most significant current environmental issues. Phenanthrene and naphthalene adsorption at activated carbon beds prevent the release of these compounds into the environment. The objective of this research was to compare the amounts of phenanthrene and naphthalene adsorption at activated carbon beds in the n-hexane solution.Material and Method: This discontinuous experimental study was conducted in the laboratory scale batch and in the n-hexane solution containing phenanthrene and naphthalene.PH values were adjusted by adding hydrochloric acid and 1 N NaOH. The initial and residual phenanthrene and naphthalene concentrations were spectrophotometrically measured at 270 and 266 nm, respectively.Result: Findings showed that the maximum adsorption of naphthalene was obtained at pH=5 and contact time of 8 hours (7.4 mg/gr). The maximum adsorption was reached at pH=7 and contact time of 11 hours for phenanthrene (8.34 mg/gr).Improvement in the adsorption capacity was happened by the increases in contact time and initial phenanthrene and naphthalene concentrations. The adsorption kinetics of these two compounds followed pseudo-second-order and Freundlich isotherm model.Conclusion: Freundlich isotherm model showed a strong association with PAHs adsorption process. A weak correlation was observed between Langmuir theory and the results of the adsorption at activated carbon beds in the organic n-hexane solution.

Introduction: Each year, many people suffer from numerous injuries and damages in construction industry. Determination of factors that cause the most problems in a process is the most important step to improve the situation. Pareto chart can be used to explore factors causing most of the problems. The aim of this study was to survey construction accidents in Qom city using Pareto chart.Material and Method: In this descriptive-analytical study, all accidents related to construction industry registered during 2009-2012 in the social security organization of Qom city, were analyzed using Pareto chart and mini-tabs software.Result: According to the results, 73.3% of accidents are due to objects and workforce being fallen. About 73.3% of the events occurred among 20-40 years old people. Hands and feet injuries comprised 53.4% of the accidents. Approximately, 61.8 percent of accident occurred in the first six months of the year. Moreover, the highest percentage of accidents was happened on Wednesday (19.4), Saturday (18.8), while Friday (8.4) and Thursday (10.5) had the lowest percentage of incidents.Conclusion: Employing Pareto charts as a method for analyzing and identification of accident causes can have an effective role in the management of work-related accidents, proper allocation of funds and time.

Introduction: Outdoor workers are exposed to heat from solar radiation and the atmospheric conditions, in addition to the heat from the working process, which is worse by global warming. The purpose of this study was to evaluate heat stress based on wet bulb globe temperature index and also to examine the relationship between WBGT and physiological indices among outdoor workers of Shabestar city.Material and Method: This cross-sectional study was conducted in August 2014. WBGT measurements were taken according to ISO7243 standard in different hours. The physiological response of 53outdoor workers (including heart rate, systolic and diastolic blood pressure, oral temperature, and skin temperature) were measured among9occupationalgroups, including municipal workers, concrete makers, porters, construction and road making workers, stonemasons, farmers, traffic officers, and street vendors.Result: The mean WBGT index for all outdoor workers, except for municipal workers, street vendors, traffic officers and stonemason, was greater than threshold limit. The highest average WBGT index was for construction workers and the lowest was for municipal workers (respectively 27 and 26oC). Moreover, a significant direct association was reported between the WBGT index and physiological parameters (P<0.0001), with the highest correlation coefficient belonged to heart rate (r=0.492).Conclusion: According to WBGT index, porters, Concrete makers, construction and road makers, and farmers had the highest exposure at all times of the day while the lowest level was related to municipal workers. What is more, heat stress showed a significant correlation with the study strains. Therefore, it is essential to conduct further research and in order to represent preventive countermeasures for the workers in this field.