مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resources

Persian Verion

Scientific Information Database (SID) - Trusted Source for Research and Academic Resources

video

Scientific Information Database (SID) - Trusted Source for Research and Academic Resources

sound

Scientific Information Database (SID) - Trusted Source for Research and Academic Resources

Persian Version

Scientific Information Database (SID) - Trusted Source for Research and Academic Resources

View:

1,840
Scientific Information Database (SID) - Trusted Source for Research and Academic Resources

Download:

0
Scientific Information Database (SID) - Trusted Source for Research and Academic Resources

Cites:

Information Journal Paper

Title

EXTRA HIGH LIMITING DRAWING RATIO (LDR=9) CYLINDRICAL DEEP DRAWING BASED ON FINITE ELEMENT AND EXPERIMENT

Pages

  519-525

Abstract

DEEP DRAWING of cylindrical shapes with high limiting drawing ratio (LDR) values is relatively difficult. Annealing is a further operation, which in turn adds costs and consumes significantly time to the forming process. In the present work, cylindrical cups from brass sheet were made with only limited anneal during few steps, but having LDR of 9 that is about 2 times higher than previous works. Cups having 4 mm IDs and 70 mm heights were made successfully. The process was simulated by ABAQUS/Explicit finite element (FE) code and EXPERIMENTal tests were carried out based on FEM results. Parameters affecting the process were studied with EXPERIMENTal results, as well as FEM. The wall thickness obtained from the approach were compared for several tests, and verified significantly.

Cites

  • No record.
  • References

  • No record.
  • Cite

    APA: Copy

    FARAJI, GH., BESHARATI GIVI, M.K., YARMOHAMMADI, S., & MOSAVI MASHHADI, M.. (2009). EXTRA HIGH LIMITING DRAWING RATIO (LDR=9) CYLINDRICAL DEEP DRAWING BASED ON FINITE ELEMENT AND EXPERIMENT. JOURNAL OF FACULTY OF ENGINEERING (UNIVERSITY OF TEHRAN), 43(4 (123 SPECIAL ISSUE ON: MECHANINCAL ENGINEERING)), 519-525. SID. https://sid.ir/paper/14199/en

    Vancouver: Copy

    FARAJI GH., BESHARATI GIVI M.K., YARMOHAMMADI S., MOSAVI MASHHADI M.. EXTRA HIGH LIMITING DRAWING RATIO (LDR=9) CYLINDRICAL DEEP DRAWING BASED ON FINITE ELEMENT AND EXPERIMENT. JOURNAL OF FACULTY OF ENGINEERING (UNIVERSITY OF TEHRAN)[Internet]. 2009;43(4 (123 SPECIAL ISSUE ON: MECHANINCAL ENGINEERING)):519-525. Available from: https://sid.ir/paper/14199/en

    IEEE: Copy

    GH. FARAJI, M.K. BESHARATI GIVI, S. YARMOHAMMADI, and M. MOSAVI MASHHADI, “EXTRA HIGH LIMITING DRAWING RATIO (LDR=9) CYLINDRICAL DEEP DRAWING BASED ON FINITE ELEMENT AND EXPERIMENT,” JOURNAL OF FACULTY OF ENGINEERING (UNIVERSITY OF TEHRAN), vol. 43, no. 4 (123 SPECIAL ISSUE ON: MECHANINCAL ENGINEERING), pp. 519–525, 2009, [Online]. Available: https://sid.ir/paper/14199/en

    Related Journal Papers

    Related Seminar Papers

  • No record.
  • Related Plans

  • No record.
  • Recommended Workshops






    Move to top