فیلترها/جستجو در نتایج    

فیلترها

سال

بانک‌ها




گروه تخصصی











متن کامل


اطلاعات دوره: 
  • سال: 

    1402
  • دوره: 

    17
  • شماره: 

    1
  • صفحات: 

    165-179
تعامل: 
  • استنادات: 

    0
  • بازدید: 

    128
  • دانلود: 

    34
چکیده: 

In order to predict the behavior of soil-related phenomena, it is necessary to have knowledge about unsaturated flow and using models that provide optimal estimates of the retention curve and hydraulic Conductivity of soils. Despite the widespread use of the classic van Genuchten-Mualem model (VGM), this model usually performs poorly in predicting hydraulic Conductivity and modification of some of its parameters seems necessary. In this research, a number of 283 soils from different texture of the UNSODA bank were selected and divided into two sections of calibration and validation sections and their soil parameters were extracted and categorized. Then, by defining the modified unsaturated hydraulic Conductivity (Ksc) instead of the saturated hydraulic Conductivity (Ks) and determining the limits for l and n parameters, the hydraulic Conductivity-moisture function of this model were solved using 24600 pairs of points li and nj for each soil of the three main soil texture classes. In the following, the optimal l value (l̂) of each texture class was selected based on the minimum value of the hydraulic Conductivity estimation error using the root mean square error (RMSE) index and the n values that create the minimum errors were selected as the optimal pore size distribution coefficients of the hydraulic Conductivity-moisture function (n̂opt). In order to create pedotransfer functions for estimating n̂opt, we ran stepwise regression in MATLAB software considering the condition of statistical significance (P-value=0.05) for independent variables and functions for each soil texture class. After creating pedotransfer functions, the results of the proposed method of this research (MVGM) were compared with the VGM model results using RMSE and Nash-Sutcliffe (NSE) indices. The results showed that in both sections of creating and validation functions, the MVGM performed better in estimating hydraulic Conductivity and had a higher efficiency index for all classes of soil texture.

شاخص‌های تعامل:   مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resources

بازدید 128

مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesدانلود 34 مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesاستناد 0 مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesمرجع 0
نویسندگان: 

SINGH A.K.

نشریه: 

DEFENCE SCIENCE JOURNAL

اطلاعات دوره: 
  • سال: 

    2008
  • دوره: 

    58
  • شماره: 

    -
  • صفحات: 

    600-607
تعامل: 
  • استنادات: 

    1
  • بازدید: 

    185
  • دانلود: 

    0
کلیدواژه: 
چکیده: 

شاخص‌های تعامل:   مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resources

بازدید 185

مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesدانلود 0 مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesاستناد 1 مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesمرجع 0
نویسندگان: 

SADEGHI A.

اطلاعات دوره: 
  • سال: 

    2012
  • دوره: 

    14
  • شماره: 

    5
  • صفحات: 

    975-984
تعامل: 
  • استنادات: 

    0
  • بازدید: 

    465
  • دانلود: 

    0
چکیده: 

Application of feed pellets in animal and aquatic farming industries has grown because of both the physical and the nutritional benefits it provides. Development of feed pellets manufacturing industry is also considerable. Steam conditioning process, which plays an important role in pelleting production, includes heating feed particles, adding moisture, and mixing the mash. Pellets cooling and drying processes are also involved in heat transfer phenomena. In this study, thermal Conductivity of feed pellets was determined at different temperatures ranging from 25 to 85oC and moisture contents of 11.8 to 18.2% wb. It was measured by the transient technique using the line heat source method assembled in a thermal Conductivity probe. It turned out that decreasing moisture contents from 18.2 to 11.8% (wb) produced non-linear reduction in thermal Conductivity.The average values of thermal Conductivity changed from 0.1509 to 0.2143 W m-1 oC-1 at different moisture contents. Tests conducted on two pellet size categories (based on nominal diameter) revealed a significant difference in thermal Conductivity between these categories. The thermal conductivities of the first category (minor than nominal dia.) appeared to be 8.5% higher than those of the second category (superior to nominal dia.).Average values of thermal Conductivity changed from 0.1538 to 0.2333 W m-1 oC-1 for the first category and from 0.1235 to 0.2456 W m-1 oC-1 for the second category (in 25oC). In addition, some empirical models were developed to express thermal properties as a function of moisture content and temperature.

شاخص‌های تعامل:   مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resources

بازدید 465

مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesدانلود 0 مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesاستناد 0 مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesمرجع 0
مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resources
اطلاعات دوره: 
  • سال: 

    1397
  • دوره: 

    8
  • شماره: 

    17
  • صفحات: 

    145-155
تعامل: 
  • استنادات: 

    0
  • بازدید: 

    619
  • دانلود: 

    139
چکیده: 

در این مقاله رسانش اسپینی گرافین گاف دار را محاسبه و نحوه تغییرات آن را با پارامتر های مختلفی از جمله مغناطش، اندرکنش کولنی و گاف انرژی بررسی می کنیم. برای هامیلتونی سیستم از مدل هابارد استفاده می کنیم. در دو وضعیت رسانندگی را به دست می آوریم. یکی بدون در نظر گرفتن اندرکنش کولنی بین الکترون ها و دیگری با حضور اندرکنش کولنی بین الکترون ها. می بینیم که در حالت غیر اندرکنشی با افزایش مغناطش و گاف انرژی رسانندگی اسپینی در فرکانس ثابت افزایش می یابد. در حالت اندرکنشی نمودارهای رسانندگی برحسب فرکانس دو قله دارند که یکی از قله ها مربوط به الکترون های اسپین بالا و دیگری مربوط به الکترون های اسپین پایین است. با افزایش مغناطش قله های مربوط به الکترون های اسپین بالا به سمت فرکانس های پایین تر و قله های مربوط به الکترون های اسپین پایین به سمت فرکانس های بالا تر منتقل می شوند. با افزایش گاف انرژی و قدرت اندرکنش کولنی قله های مربوط به الکترون های اسپین بالا واسپین پایین با هم به سمت فرکانس های بالا تر انتقال می یابند.

شاخص‌های تعامل:   مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resources

بازدید 619

مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesدانلود 139 مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesاستناد 0 مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesمرجع 0
نویسندگان: 

AZIMI H.R. | TAHERI R.

اطلاعات دوره: 
  • سال: 

    2015
  • دوره: 

    6
  • شماره: 

    1 (SPECIAL ISSUE FOR CNC)
  • صفحات: 

    77-81
تعامل: 
  • استنادات: 

    0
  • بازدید: 

    625
  • دانلود: 

    0
چکیده: 

An empirical electrical Conductivity assessment of nanofluids comprising CuO nanoparticles water-based in different concentrations, particles size and various temperatures of nanofluids has been carried out in this paper. These experimentations have been done in deionized water with nanoparticles sizes such as 89, 95, 100 and 112 nm and concentrations of 0.12 g/l, 0.14 g/l, 0.16 g/l and 0.18 g/l so nanofluids obtain in temperatures such as 25oC, 35oC, 45oC and 50oC for investigation of their electrical Conductivity. It is observed that, in water-based nanofluids, the electrical Conductivity increases with increasing in both nanofluids temperatures and concentration respectively in the range 25-50oC and 0.12-0.18g/l. But in nanoparticles size rising in nanofluids we observe that electrical Conductivity has a few increase when nanoparticles have 95nm diameters, so decrease for biggest nanoparticles such as 100 and 112nm. It seems that there is an optimum in electrical Conductivity with resize of nanoparticles.

شاخص‌های تعامل:   مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resources

بازدید 625

مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesدانلود 0 مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesاستناد 0 مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesمرجع 1
نویسندگان: 

CHE J. | CAGIN T. | GODDARD W.A.

نشریه: 

VIRTUAL

اطلاعات دوره: 
  • سال: 

    621
  • دوره: 

    1
  • شماره: 

    1
  • صفحات: 

    65-69
تعامل: 
  • استنادات: 

    3
  • بازدید: 

    182
  • دانلود: 

    0
کلیدواژه: 
چکیده: 

شاخص‌های تعامل:   مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resources

بازدید 182

مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesدانلود 0 مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesاستناد 3 مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesمرجع 0
مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resources
اطلاعات دوره: 
  • سال: 

    1396
  • دوره: 

    7
  • شماره: 

    13
  • صفحات: 

    51-59
تعامل: 
  • استنادات: 

    0
  • بازدید: 

    729
  • دانلود: 

    158
چکیده: 

در این مقاله رسانندگی الکتریکی یک سیستم ناپایدار نظریة QCD در دمای پایین بررسی شده است. یک راه مطالعه چنین سیستم هایی، اعمال یک میدان الکتریکی وابسته به زمان و بررسی رفتار زمانی خارج از تعادل سیستم است. اعمال میدان الکتریکی باعث تولید زوج های کوارک و آنتی کوارک از فاز محبوس QCD و ایجاد یک جریان الکتریکی می شود. با استفاده از رابطة بین شدت میدان الکتریکی اعمال شده و جریان الکتریکی حاصل از آن می توان رسانندگی الکتریکی نظریة میدان را به دست آورد. برای دست یابی به حل غیر اختلالی این سیستم ناپایدار وابسته به زمان، از یک مدل هولوگرافیک غیر بحرانی QCD استفاده شده است و تأثیر پارامترهایی نظیر شدت میدان الکتریکی، فرکانس اعمال میدان و چگالی بار بر روی رسانندگی الکتریکی مورد مطالعه قرار گرفته است. در نهایت، نتایج به دست آمده، با نتایج حاصل از سایر مدل ها مقایسه شده است.

شاخص‌های تعامل:   مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resources

بازدید 729

مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesدانلود 158 مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesاستناد 0 مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesمرجع 0
نویسنده: 

Moradifam Amir

اطلاعات دوره: 
  • سال: 

    2016
  • دوره: 

    47
تعامل: 
  • بازدید: 

    308
  • دانلود: 

    0
کلیدواژه: 
چکیده: 

I WILL DISCUSS THE PROBLEM OF RECOVERING AN ISOTROPIC Conductivity OUTSIDE OF SOME PERFECTLYCONDUCTING OR INSULATING INCLUSIONS FROM KNOWLEDGE OF THE MAGNITUDE OF ONE CURRENT DENSITYVECTOR FIELD. THIS PROBLEM IS CLOSELY RELATED TO UNIQUENESS OF MINIMIZERS OF CERTAIN WEIGHTED LEASTGRADIENT PROBLEMS AND THEORY OF MINIMAL SURFACES. ...

شاخص‌های تعامل:   مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resources

بازدید 308

مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesدانلود 0
اطلاعات دوره: 
  • سال: 

    2019
  • دوره: 

    6
  • شماره: 

    2
  • صفحات: 

    85-93
تعامل: 
  • استنادات: 

    0
  • بازدید: 

    323
  • دانلود: 

    0
چکیده: 

Liquid paraffin as a coolant fluid can be applied in electronic devices as a result to its suitable capabilities such as electrical insulating, high heat capacity, chemical and thermal stability, and high boiling point. However, the poor thermal Conductivity of paraffin has been confined its thermal cooling application. Addition of high conductor nanoparticles to paraffin can fix this drawback properly. In this article, the influence of the nanoparticles on the thermal Conductivity of base material was assessed. Temperature (20-50° C) and volume fractions (0-3%) effect on the thermal Conductivity of paraffin/alumina nanofluids have been considered. Nanofluid samples were prepared applying the two-step method. The thermal Conductivity was measured by a KD2 pro instrument. The results indicated the thermal Conductivity augments smoothly with an increase in volume fraction of nanoparticles as well as temperature. Moreover, it observed that for nanofluids with more volume-fraction the temperature affection is more remarkable. Thermal Conductivity enhancement (TCE) and effective thermal Conductivity (ETC) of the nanofluid was calculated and new correlations were reported to predict the values of them based on the volume fraction of nanoparticles and temperature of nanofluid accurately.

شاخص‌های تعامل:   مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resources

بازدید 323

مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesدانلود 0 مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesاستناد 0 مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesمرجع 0
نشریه: 

آب و خاک

اطلاعات دوره: 
  • سال: 

    1389
  • دوره: 

    24
  • شماره: 

    2
  • صفحات: 

    317-324
تعامل: 
  • استنادات: 

    0
  • بازدید: 

    1316
  • دانلود: 

    225
چکیده: 

انعکاس سنج زمانی4 به طور گسترده در خاک برای اندازه گیری میزان ضریب دی الکتریک(Ka)  و شوری کل خاک (σa) استفاده می شود. از اندازه گیری شوری کل و ضریب دی الکتریک برای اندازه گیری شوری محلول خاک(σp) استفاده می گردد. هیل هورست (4) تئوری مدل رابطه خطی بین شوری کل خاک و ضریب دی الکتریک را در خاک مرطوب ارایه نمود. همچنین از این رابطه خطی برای به دست آوردن شوری محلول در خاک هایی با بافت های مختلف بدون استفاده از کآلیبراسیون مخصوص برای هر خاک استفاده کرد. هدف از این مطالعه ارزیابی مدل خطی فوق با داده های به دست امده از TDR می باشد. مطالعات قبلی در این زمینه عمدتا در بافت های سبک انجام شده و در این مطالعه از بافت های رسی، لومی رسی، لومی، سیلتی رسی، لوم رس شنی استفاده شده است. نتایج نشان داد که این مدل خطی برای بافت های سبک نتایج بهتری نسبت به بافت های متوسط تا سنگین می دهد و دلیل ان، کاهش r2 به علت کاهش ضریب دی الکتریک در آب موجود در خاک هایی با بافت سنگین می باشد در صورتی که در مدل خطی این ضریب دی الکتریک ثابت و برابر با80 (در دمای 20 درجه سانتی گراد) در نظر گرفته شده است.

شاخص‌های تعامل:   مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resources

بازدید 1316

مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesدانلود 225 مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesاستناد 0 مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesمرجع 0
litScript
telegram sharing button
whatsapp sharing button
linkedin sharing button
twitter sharing button
email sharing button
email sharing button
email sharing button
sharethis sharing button