INTERNATIONAL JOURNAL OF INDUSTRIAL MATHEMATICS
Year:2014 | Volume:6 | Issue:4|Papers Count:10

Documented on the confirmation provided by the commission of consideration and affirmation of science magazines in Azad university, and based on the vote of 61th session of above mentioned commission, dated 1.2.2010, the magazine named "International Journal of Industrial Mathematics", in Science and Research Branch of Islsmic Azad University, is awarded the Science and Research degree.This letter of approval, will be valid for a year the data of affirmation.

In wireless channel the noise has a zero mean. This channel property can be used in the enhancement of the noise performance in the digital receivers by oversampling the received signal and calculating the decision variable based on the time average of more than one sample of the received signal. The averaging process will reduce the effect of the noise in the decision variable that will approach to the desired signal value. The averaging process works like a filter that reduces the noise power at its output according to its averaging interval. Although the power spectrum of the noise does not change according to the averaging process, the noise variance at the decision variable will be smaller than the channel noise variance. This paper studies this idea and show how the performance of digital receivers can be enhanced by oversampling the received signal. This paper shows another treatment method to the noise problem in digital modulation systems.

In the present study, the onset of double diffusive reaction-convection in a fluid layer with viscous fluid, heated and salted from below subject to chemical equilibrium on the boundaries, has been investigated. Linear and nonlinear stability analysis have been performed. For linear analysis normal mode technique is used and for nonlinear analysis minimal representation of truncated Fourier series is used. The effect of Lewis number, solute Rayleigh number, reaction rate and Prandtl number on the stability of the system is investigated. A weak nonlinear theory based on the truncated representation of Fourier series method is used to find the heat and mass transfer.

In this paper, we have considered the problem of rotating, magneto hydrodynamic heat and mass transfer by free convective flow past an exponentially accelerated isothermal vertical plate in the presence of variable mass diffusion. While the temperature of the plate is constant, the concentration at the plate is considered to be a linear function with respect to time t. The plate is assumed to be exponentially accelerated with a prescribed velocity against the gravitational field. The governing equations are solved by using Laplace transform technique and the effect of various physical parameters on the flow quantities are studied through graphs and the results are discussed. With the aid of the velocity, temperature and concentration fields the expressions for skin friction, rate of heat transfer in the form of Nusselt number and rate of mass transfer in the form of Sherwood number are derived and the results are discussed with the help of tables.

In the literature hardly any attention is paid to solving a fuzzy fixed charge transportation problem. In this paper, we consider the fully fixed-charge transportation problem and try to find both the lower and upper bounds on the fuzzy optimal value of such a problem in which all of the parameters are triangular fuzzy numbers. To illustrate the proposed method, a numerical example is presented.

In this paper, a nonlinear Volterra-Fredholm integral equation of the first kind is solved by using the homotopy analysis method (HAM). In this case, the first kind integral equation can be reduced to the second kind integral equation which can be solved by HAM. The approximate solution of this equation is calculated in the form of a series which its components are computed easily. The accuracy of the proposed numerical scheme is examined by comparing with other analytical and numerical results. The existence, uniqueness and convergence of the proposed method are proved. Example is presented to illustrate the efficiency and the performance of the homotopy analysis method.

Data envelopment analysis (DEA) has been proven as an efficient technique to evaluate the performance of homogeneous decision making units (DMUs) where multiple inputs and outputs exist. In the conventional applications of DEA, the data are considered as specific numerical values with explicit designation of being an input or output. However, the observed values of the data are sometimes imprecise (i.e. input and output variables cannot be measured precisely) and data are sometimes flexible (measures with unknown status of being input or output are referred to as flexible measures in the literature). In the current paper a number of methods are proposed to evaluate the relative efficiency and to identify the status of fuzzy flexible measures. Indeed, the modified fuzzy DEA models are suggested to accommodate flexible measures. In order to obtain correct results, alternative optimal solutions are considered to deal with the fuzzy flexible measures. Numerical examples are used to illustrate the procedure.

The notion of a bead metric space is defined as a nice generalization of the uniformly convex normed space such as CAT (0) space, where the curvature is bounded from above by zero. In fact, the bead spaces themselves can be considered in particular as natural extensions of convex sets in uniformly convex spaces and normed bead spaces are identical with uniformly convex spaces. In this paper, we dene a new version of bead space and called it CN -bead space. Then the existence of fixed point for asymptotically nonexpansive mapping and total asymptotically nonexpansive mapping in CN -bead space are proved. In other word, Let K be a bounded subset of complete CN -bead space X. Then the fixed point set F (T), where T is a total asymptotically nonexpansive selfmap on K, is nonempty and closed. Moreover, the fixed point set F (T), where T is an asymptotically nonexpansive selfmap on K, is nonempty.

As we know, developing mathematical models and numerical procedures that would appropriately treat and solve systems of linear equations where some of the system's parameters are proposed as fuzzy numbers is very important in fuzzy set theory. For this reason, many researchers have used various numerical methods to solve fuzzy linear systems. In this paper, we dene the concepts of midpoint and radius functions for a fuzzy number, midpoint and radius vectors for a fuzzy number vector and midpoint and radius systems for a fuzzy linear system. All these new definitions are defined based on the parametric form of fuzzy numbers. Then, by these new concepts, we propose a simple method to solve a fuzzy linear system and obtain it's algebraic solution. Also, we present a sufficient condition for the obtained solution vector to be always a fuzzy vector. Finally, several numerical examples are given to show the efficiency and capability of the proposed method.

This paper presents an application of partial differential equations (PDEs) for the segmentation of abdominal and thoracic aortic in CTA datasets. An important challenge in reliably detecting aortic is the need to overcome problems associated with intensity inhomogeneities. Level sets are part of an important class of methods that utilize partial differential equations (PDEs) and have been extensively applied in image segmentation. A kernel function in the level set formulation aids the suppression of noise in the extracted regions of interest and then guides the motion of the evolving contour for the detection of weak boundaries. The speed of curve evolution has been significantly improved with a resulting decrease in segmentation time compared with traditional implementations of level sets, and are shown to be more effective than other approaches in coping with intensity inhomogeneities. We have applied the Courant Friedrichs Levy (CFL) condition as stability criterion for our algorithm.