INTERNATIONAL JOURNAL OF ENVIRONMENTAL SCIENCE AND TECHNOLOGY (IJEST)
Year:2011 | Volume:8 | Issue:4 (32)|Papers Count:20

The fractionation of five heavy metals in a washing aggregate sludge, a sewage sludge, a clay-rich sediment, the mixtures of these materials and the lightweight aggregates manufactured with them has been determined by applying the optimized European Community Bureau of Reference sequential extraction procedure in order to evaluate the effects of the heating process on the extraction of these elements. Additionally, preparation of eluates by aggregate leaching has been performed in accordance with the UNE-EN-1744-3 standard. The availability of all the studied heavy metals has been reduced by the thermal treatment, since most of the heavy metals have become part of the undigested material in the lightweight aggregates. Nickel has been the heavy metal that has presented the highest concentration in the eluates obtained after completion of the single extraction procedure in the lightweight aggregates. The studied lightweight aggregates may be used in lightweight concrete manufacturing from the standpoint of heavy metal leaching.

The increase in the volume of waste materials discharged to the environment and deterioration of environmental quality in urban areas have been an issue of major concern for many governments in developing countries. To improve effectiveness and efficiency in the delivery of waste management services some of the governments have involved the private sector. This study uses binary choice model to examine urban residents’ perceptions regarding solid waste management that involves the private sector and what could be done to improve the waste management services. The data were generated from survey conducted in 238 households in Ilorin in southwest Nigeria. The results show that most of the respondents were not satisfied with solid waste management in the Ilorin. Binary logit model estimates reveal that the respondents’ perceptions regarding waste management were determined by income, travel time to dump site and marital status, as well as awareness of laws regarding waste disposal and activities of sanitary inspectors. For solid waste management in urban areas to be sustainable, it requires participation of the government, private sector and residents. The results generated from this study can help waste management authorities in designing a more sustainable waste management strategy in Ilorin, as well as in other cities that have similar conditions.

The goal of this study was to evaluate whether short 1 h sublethal assays may predict the results of 24 h lethality assays with rotifers Brachionus calyciflorus and anostracan crustaceans Thamnocephalus platyurus. The test bionts were hatched from cysts. Inhibition of ingestion was observed after 15 min of incubation of rotifers and crustaceans with the suspension of carmine and latex beads, respectively. Nine compounds with different modes of action were used as toxicants zinc ions, sodium dodecyl sulphate, p-nitrophenol, 3, 5-dichlorophenol and pharmaceuticals propranolol, fluoxetine, abamectin, doramectin and ivermectin. The toxicity values observed in the ingestion tests were very close to the mortality values over a wide range of toxicity from a low toxic surfactant to very toxic avermectins. The ratio between the 1 h EC50’s in the ingestion test and the 24 h LC50’s in the lethality test was below 2 in all cases for rotifers, and 7 in 9 cases for crustaceans. The toxicity of zinc and 3, 5-dichlorophenol in the Thamnotoxkit F™ was 15-fold higher and 10 fold lower than in the ingestion test, respectively. The 24 h LC50 values are within the range of 25- 400 % of the 1 h EC50 values for almost all toxicants tested with the exception of p-nitrophenol for B. calyciflorus and zinc and 3, 5-dichlorophenol for T. platyurus. Short, 1 h ingestion assays Rotoxrapid and Rapidtoxkit are good predictors of the mortality over the next 24 h and can be used as a range finding tests for representatives of pharmaceuticals and surfactants.

A central composite face-centered design was used to study and to optimize lead biosorption from aqueous solution on Aspergillus terreus biomass. Four factors such as stirring speed, temperature, solution pH and biomass dose at different levels were studied. The hierarchical quadratic model were established by adding replicates at the central point and axial points to the initial full factorial design (24). The percentage removal of lead was affected by biomass dose, pH, and interactions between pH and biomass dose, pH and stirring speed, pH and temperature. The hierarchical quadratic model described adequately the response surface based on the adjusted determination coefficient (R2Adj=0.97) and the adequate precision ratio (42.21). According to this model, the optimal conditions to remove lead completely from aqueous solutions (at initial lead concentration of 50 mg/L and solutions of 100 mL) with Aspergillus terreus were at pH 5.2, 50oC, stirring speed of 102/min and a biomass dose of 139 mg. The response surface methodology can be used to determine the optimal conditions for metal adsorption on several adsorbents. In addition, results reported in this research demonstrated the feasibility of employing A. terreus as biosorbent for lead removal.

Production of ten hydrolytic enzymes was qualitatively studied on the haloarchaeal strains isolated from Aran-Bidgol hypersaline lake in the central desert area of Iran. A total of 293 haloarchea strains were selected among 300 extremely halophilic isolated prokaryotes. Accordingly, 142, 141, 128, 64, 38, 16, 7, 3 and 1 archaeal isolates were able to produce DNase, amylase, lipase, inulinase, pullulanase, protease, cellulase, chitinase and xylanase, respectively. None was able to produce pectinase activity. Combined hydrolytic activity was also detected in many strains. A total of 0.3 % of the strains showed 6 hydrolytic activities, 0.3 % of the strains had 5 hydrolytic activities, 5.4 % of the strains presented 4 hydrolytic activities, 25 % of the strains presented 3 hydrolytic activities, 28 % of the strains presented 2 hydrolytic activities and 18 % of the strains presented 1 hydrolytic activity. According to their phenotypic characteristics and comparative partial 16 S rRNA sequence analysis, the halophilic strains were all identified as members of family Halobacteriaceae within 12 different taxa from the following genera: Halorubrum, Haloarcula, Natrinema, Halovivax and Natronomonas. Most enzymes production rate was observed in the genera Halorubrum, Haloarcula and Natrinema whereas; there was not any detectable amount of enzyme production in the genera Halovivax and Natronomonas. The most hydrolytic isolate with 6 combinatorial enzyme production belonged to the genus Natrinema. This investigation showed that the extreme halophilic archaea from Aran-Bidgol lake are a potential source of hydrolytic enzyme under stress conditions and may have possess commercial value.

concern of food chain. The bioavailability of metals is determined by its fractions which are affected by the soil properties and its aging time. This paper focused on the aging effect on the bioavailability of copper added to the soil. The garden soil (fluvo aquic soil) was treated with 100 mg/kg and 1000 mg/kg of copper (II) sulfate and incubated for 14, 21, 28, 42, 63, 120, 200, 300 and 400 days in the laboratory respectively. The sequential extraction procedure was used to characterize copper bioavailability in the soil. Meanwhile, the barley was cultured on the same soil incubated and its toxicity was assessed according to the guideline of International Organization for Standardization. The findings show that the exchangeable and carbonate-bound copper decreased with the aging time after addition of copper (II) sulfate to soil. Meanwhile, the percentages of Fe-Mn oxides- and organic-bound copper increased. The residual copper was changed little during the aging course. The copper fractions became stable in soils after 60 days. The kinetic equations showed that the Power function and the Elovich equation were well fitted to the experimental data, and the r2 values ranged from 0.840 to 0.982 and 0.741 to 0.975, respectively. The barley test showed that the barley root length was more sensitive to reflect copper toxicity than the shoot biomass, and the exchangeable and carbonate-bound copper were significantly correlated with the barley root length.

Water and sediment samples were collected from 20 location of the Buriganga river of Bangladesh during Summer and Winter 2009 to determine the spatial distribution, seasonal and temporal variation of different heavy metal contents. Sequential extraction procedure was employed in sediment samples for the geochemical partitioning of the metals. Total trace metal content in water and sediment samples were analyzed and compared with different standard and reference values. Concentration of total chromium, lead, cadmium, zinc, copper, nickel, cobalt and arsenic in water samples were greatly exceeded the toxicity reference values in both season. Concentration of chromium, lead, copper and nickel in sediment samples were mostly higher than that of severe effect level values, at which the sediment is considered heavily polluted. On average 72 % chromium, 92 % lead, 88 % zinc, 73 % copper, 63 % nickel and 68 % of total cobalt were associated with the first three labile sequential extraction phases, which portion is readily bioavailable and might be associated with frequent negative biological effects. Enrichment factor values demonstrated that the lead, cadmium, zinc, chromium and copper in most of the sediment samples were enriched sever to very severely. The pollution load index value for the total area was as high as 21.1 in Summer and 24.6 in Winter season; while values above one indicates progressive deterioration of the sites and estuarine quality. The extent of heavy metals pollution in the Buriganga river system implies that the condition is much frightening and may severely affect the aquatic ecology of the river.

Urban settlements of regional importance from Romania impose within the national settlements system by their ability to converge material and human flows, leading to important unbalances in the relationships between the components of territorial systems. The status they held, both in the communist period and at present, made the economic activities developed in a short time exceed the adapting ability of the other components of the territorial system, the natural environment strongly feeling the industrialisation pressure. Identifying the specificities of the environmental risk management at the level of development poles of regional importance was done by detailed analyses accomplished in Craiova, a representative town for the high concentration of economic activities strongly pressing upon the natural environment. The construction of the model of environmental risk management supposes the classifying of risks by a series of criteria, a model which constitutes a useful instrument for the decision factors. The management of unbalances from the territorial systems determined by industrialisation is one of the major preoccupations of the decision factors from Romania, in order to be aligned to the European environment standards.

Dynamic behavior of cigarette smoke particles inside the cabin of cars is investigated and the respirable suspended particles concentration during and after smoking cigarette is predicted in this study. This model is based on mass balance equations. Mechanisms of deposition on the surfaces and the exchange of air in the cabin are considered as sinks for emitted particles. The coagulation is accounted as a sink for smaller particles and as a source for larger particles. The various scenarios of smoking in the cars available in the literature are simulated in this study. Good agreement between the results of the present model and the experimental data, as well as the predictions of other available models, is achieved. The mean respirable suspended particle concentration in different scenarios is estimated and compared with Environmental Protection Agency’s health-based standards in order to specify the situations with respirable suspended particles concentrations exceeding the allowable limits. The results show that the concentration of particles due to the smoke of a single cigarette in a stationary medium sized car with the air conditioner off is 33.6 mg/m3 and nearly reaches the limits appointed by the Environmental Protection Agency for a 24 h incremental exposure (35 mg/m3). Corresponding values for moving cars have also been calculated and compared with the standards.

Geoelectrical resistivity, hydrogeochemical and soil properties analysis methods were used for chemical fertilizer monitoring in sandy soil at a palm oil plantation in Machang, Malaysia. The time lapse monitoring was done using these methods five times within a three-month period. The hydrogeochemical analysis was conducted over three auger holes to a depth of 1 m and sampled at 25 cm intervals. Chemical fertilizer was applied to the 21 x 21 m2 area after the first data set measurement. The areas outside of this fertilized zone are considered a nonfertilized zone. The other four data sets were acquired at about equal time intervals, thus giving a four-post fertilization data set. The hydrogeochemical measurements indicate that the cations content are relatively similar for every time lapse measurement. However, relatively higher changes of anions content occur at the surface level to a depth of 1 m. The nitrate concentration above the limit for safe human consumption as it returns to the initial value about 100 days after fertilization. The geoelectrical model prior to fertilization showed similar resistivity values at near surface to a depth of about 75 cm with no significant occurrences of low resistivity values. Lower resistivity values were obtained during the second, third, fourth and fifth measurements within the chemically fertilized zone. In the last measurement, the resistivity values in the fertilized zone are almost similar to the nonfertilized zone. This indicates that the contaminant has dissolved into the surrounding environment within this time period.

The voltage and the power production of two gram negative and two gram positive bacteria in four identical continuous flow microbial fuel cells combined with biological wastewater treatment units were evaluated and compared in the present study. Each microbial fuel cell and biological treatment unit was operated at four different flow rates and four different external load resistances. The results show that overall removal efficiency of chemical oxygen demand for all four systems can reach more than 85.5 %. Each pure culture has different power generation performance that can be affected by some factors, such as wastewater characteristics, influent flow rate and hydraulic retention time of reactor. Good linear relationships between the flow rate and the potential and between the flow rate and the power density on four pure cultures at different external load resistances were found. Comamonas testosteroni has better power generation performance than Arthrobacter polychromogenes, especially at higher flow rate. Although Pseudomonas putida also showed higher power generation than Corynebacterium glutamicum, the difference was not statistically significant. It seems that gram negative bacteria could display higher power generation than gram positive bacteria at higher flow rate. However, more evidence is required to provide stronger proof for the difference of power generation between gram negative and gram positive bacteria.

Environmental contamination by heavy metals is a worldwide problem. Therefore, it is necessary to develop sensitive, effective and inexpensive methods, which can efficiently monitor and determine the level of hazardous metals in the environment. Conventional techniques to analyze metals, suffer from the disadvantages of high cost. Alternatively, development of simple system for monitoring heavy metals pollution is therefore needed. The present approach is based on the use of bacteria that are genetically engineered so that a measurable signal is produced when the bacteria are in contact with the bioavailable metal ions. Reporter genes are widely used as genetic tools for quantification and detection of specific cell population, gene expression and constructing whole cell biosensors as specific and sensitive devices for measuring biologically relevant concentrations of pollutants. An attempt has been made to construct the reporter gene enhanced green fluorescent protein and was expressed under the control of cadR gene, responsible for cadmium resistance. Recombinant strain Escherichia coli cadR30 was used, that carried cadR gene in pET30b expression vector and cloned. Clones confirmed by the expression of enhanced green fluorescent protein was detected under ultraviolet illumination and separated on sodium dodecyl sulfate polyacrylamide gel electrophoresis. The construction of green fluorescent protein based Escherichia coli bacterial biosensor was developed based on green fluorescent protein expression under the control cadR gene of Pseudomonas aeruginosa BC15. The constructed bacterial biosensor is useful and applicable in determining the availability of heavy metals in soil and wastewater.

The effects of varying operating conditions on metals removal from aqueous solution using a novel nano-size composite adsorbent are reported in this paper. Characterization of the composite adsorbent material showed successful production of carbon nanotubes on granular activated carbon using 1 % nickel as catalyst. In the laboratory adsorption experiment, initial mixed metals concentration of 2.0 mg/L Cu2+, 1.5 mg/L Pb2+ and 0.8 mg/L Ni2+ were synthesized based on metals concentration from samples collected from a semiconductor industry effluent. The effects of operation conditions on metals removal using composite adsorbent were investigated. Experimental conditions resulting in optimal metals adsorption were observed at pH 5, 1 g/L dosage and 60 min contact time. It was noted that the percentage of metals removal at the equilibrium condition varied for each metal, with lead recording 99 %, copper 61 % and nickel 20 %, giving metal affinity trend of Pb2+>Cu2+>Ni2+ on the adsorbent. Langmuir’s adsorption isotherm model gave a higher R2 value of 0.93, 0.89 and 0.986 for copper, nickel and lead, respectively, over that of Freundlich model during the adsorption process of the three metals in matrix solution.

The heavy metals at high concentration are generally toxic to the plants for their metabolism and growth; therefore, interactions among metals, rhizosphere microbes and plants have attracted attention because of the biotechnological potential of microorganisms for metal removal directly from contaminated soils or the possible transference of them to the plants. The aim of this study was to compare the relationships between the physiological in vitro characteristics of rhizobacteria isolated from plant metal accumulators and their distribution relating with the heavy metals content in contaminated soils. The results of this study showed that the heavy metals present in the rhizosphere of the plant species analyzed, decrease the microbial biomass and content of heavy metals caused a different distribution of rhizobacteria found. Gram negative rhizobacteria (90 %) and gram positive rhizobacteria (10 %) were isolated; all of them are metal-resistant rhizobacteria and 50 % of the isolated rhizobacteria possess both traits: higher indol acetic acid and siderophore producers. The inoculation with these rhizosphere microorganisms that possess metal-tolerating ability and plant growth promoting activities, can be recommended with a practical importance for both metal-contaminated environment and plant growth promotion.

Effect of differential trophic states on remote sensing-based monitoring and quantification of surface water quality is an important but understudied context. Landsat ETM+data-based multiple linear regression models were conducted to quantify dynamics of lake surface water quality along oligotrophic-to-eutrophic gradient and to explore the influence of trophic state on the detection of water quality dynamics by the best multiple linear regression models. The best multiple linear regression models of dissolved oxygen, chlorophyll-a, Secchi depth, water temperature, and turbidity had R2adj values ranging from 36.2 % in water temperature to 93.1% in dissolved oxygen for eutrophicYenicaga Lake and from 36.1 % in Secchi depth to 99.7 % in water temperature for oligotrophic Abant Lake. The difference in the trophic state between Lakes Abant and Yenicaga, significantly affected the composition of the nine Landsat ETM+ spectral bands included in the multiple linear regression models as well as the predictive power of the multiple linear regression models. Remote sensing-based monitoring of lake water quality variables appears to be promising in terms of devising adaptive management decisions towards sustainability of water resources.

While oil prices raise and the supply remains unsteady, it may be beneficial to use the high content of energy available in food processing wastes, such as cheese whey waste, by converting it to bioenergy. As well, there have been many new waste biotreatment technologies developed recently, which may well be used directly to food processing wastes. Microbial fuel cell represents a new technology for simultaneous use of waste materials and bioelectricity generation. In this study, bioelectricity generation with whey degradation was investigated in a twochamber microbial fuel cell with mediators. E.coli was able to use the carbohydrate found in whey to generate bioelectricity. The open-circuit voltage in absence of mediator was 751.5 mV at room temperature. The voltage was stable for more than 24 h. Riboflavin and humic acid were used as conceivable mediators. The results showed that humic acid was a few times more effective than Riboflavin. Additionally, four chemicals employed as catholyte. Based on polarization curve, FeCl3 (III) was the best. Maximum power generation and current were 324.8 mW and 1194.6 mA, respectively.

The aim of this study was to look for high efficient bioflocculant-producing microorganisms. Among 36 bacterial colonies isolated from a crude petroleum oil sample, three of them as Bacillus subtilis and Pseudomonas spp. exhibited flocculation activity exceeding 90 % after 3 days of cultivation. They were identified by 16 S rDNA sequence analysis as Bacillus subtilis and Pseudomonas sp. Spectroscopic analysis of the polymers by nuclear magnetic resonance and fourier-transform infrared revealed that the polymers were glycoproteins. These polymers were soluble in water and insoluble in any organic solvents tested. The effects of bioflocculant dosage, temperature and pH on the flocculation activity were evaluated. The maximum bioflocculation activities were observed at an optimum bioflocculant dosage of 3.5 mg/L (strains Bacillus subtilis and Pseudomonas) and 5.0 mg/L (strain CPO14), respectively. In addition, these biopolymers were able to flocculate kaolin suspension (5 g/L) over a wide range of pH (pH 3–9) and temperature (5–50oC) tested in the presence of CaCl2. The highest flocculation activities of strains CPO8, CPO13 and CPO14 were 96.03 %, 92.17 % and 97.59 %, respectively in the early stationary phase (at 24 h), while the cell production reached its maximum in the stationary phase (at 72 h). Their efficient flocculation capabilities suggest potential applications in industries.

In the present study sediment and water samples collected from Kowsar Dam reservoir in Kohkiluye and Boyerahmad Province, southwest of Iran, are subjected to bulk digestion and chemical partitioning. The concentrations of nickel, lead, zinc, copper, cobalt, cadmium, manganese and iron in water and bed sediment were determined by atomic absorption spectrometry. The concentrations of metals bounded to five sedimentary phases were estimated. On this basis, the proportions of natural and anthropogenic elements were calculated. The anthropogenic portion of elements are as follows: zinc (96 %)>cobalt (88 %)>iron (78 %)>magnesium (78 %)>nickel (78 %)>copper (66 %)>lead (63 %)> cadmium (59 %). The results show sediment contamination by nickel, cadmium and lead, according to the world aquatic sediments and mean earth crust values. Manganese and copper have strong association with organic matter and are of high portion of sulfide bounded ions. Finally, The degree of sediment contamination was evaluated using enrichment factor, geo-accumulation index (Igeo) and pollution index (IPoll). The sediments were identified to be of high cadmium and lead pollution index. The pattern of pollution intensity according to enrichment factor is as follows; manganese (1.25)<copper (1.63)<zinc (1.93)<cobalt (2.35)<nickel (3.83)<lead (12.63)<cadmium (78.32). Cluster analysis was performed in order to assess heavy metal interactions between water and sediment. Accordingly, nickel, cadmium and copper are earth originated. Zinc, copper and manganese are dominated by pH. All the elemental concentrations in water and sediment are correlated except for sedimental copper.

The potential for photo-induced dissociation of ferri- and ferro-cyanide was investigated. The overall reactions followed first order kinetics, judged by the free cyanide analyzed in aqueous solution. The dissociation rates for ferri- and ferro-cyanide were mathematically described by the equations: C(CN, t)=C(CN, 0)e1.3t and C(CN, t)=C(CN, 0)e0.39t, respectively. In addition, photo-induced dissociation of both iron cyanides was enhanced under an alkaline environment than a neutral condition. Results from the temperature-dependent tests indicated that the dissociation rate of ferricyanide was significantly higher than that of ferro-cyanide at all treatment temperatures. The kinetic parameter, activation energy (Ea) was also experimentally determined to be 12.02 and 12.32 kJ/mol for ferri- and ferro-cyanide, respectively. The results obtained suggest that both iron cyanides are susceptible to photo-dissociation and the rates are positively correlated to the change of temperatures. The information collectively also has important implications for waste management of iron cyanides as well as for risk assessment in a field trial.

In this paper, the photocatalytic decontamination of hexavalent chromium and tri-ethyl phosphate, two important wastewater contaminants, are studied by the ultraviolet / nano-titanium dioxide process. The pH value and synergic effect between the oxidation of tri-ethyl phosphate and the reduction of hexavalent chromium were investigated in different concentrations of tri-ethyl phosphate and hexavalent chromium. Furthermore, the effects of ultraviolet and nano-titanium dioxide were investigated in a solution which contained tri-ethyl phosphate and hexavalent chromium. Results of adsorptions showed that hexavalent chromium was adsorbed better in acidic pH while the better adsorption for tri-ethyl phosphate was occurred in alkalinity pH. The reduction rate of hexavalent chromium was higher in acidic solutions while it was obtained at natural pH for tri-ethyl phosphate. In co-adsorption of hexavalent chromium and triethyl phosphate pollutants, tri-ethyl phosphate slightly increased adsorption of hexavalent chromium, but hexavalent chromium had no influence on the adsorption of tri-ethyl phosphate on nano-titanium dioxide particles. In contrast, triethyl phosphate has an improving effect on the reduction reaction rate of hexavalent chromium which increases with the interaction of the concentration of tri-ethyl phosphate in mixture. The same is true for the oxidation rate of tri-ethyl phosphate.