Frontiers in Dentistry
Year:2011 | Volume:8 | Issue:3|Papers Count:8

Objective: Reinforcement with fiber is an effective method for considerable improvement in flexural properties of indirect composite resin restorations. The aim of this in-vitro study was to compare the transverse strength of composite resin bars reinforced with pre-impregnated and non-impregnated fibers.Materials and Methods: Thirty six bar type composite resin specimens (3×2×25 mm) were constructed in three groups. The first group was the control group (C) without any fiber reinforcement. The specimens in the second group (P) were reinforced with pre-impregnated fibers and the third group (N) with non-impregnated fibers. These specimens were tested by the three-point bending method to measure primary transverse strength. Data were statistically analyzed with one way ANOVA and Tukey’s tests.Results: There was a significant difference among the mean primary transverse strength in the three groups (P<0.001). The post-hoc (Tukey) test showed that there was a significant difference between the pre-impregnated and control groups in their primary transverse strength (P<0.001). Regarding deflection, there was also a significant difference among the three groups (P=0.001). There were significant differences among the mean deflection of the control group and two other groups (PC&N<.001 and PC&P=.004), but there was no significant difference between the non- and pre-impregnated groups (PN&P=.813).Conclusion: Within the limitations of this study, it was concluded that reinforcement with fiber considerably increased the transverse strength of composite resin specimens, but impregnation of the fiber used implemented no significant difference in the transverse strength of composite resin samples.

Objective: Attempts to treat class II malocclusions without extraction in non-compliant patients have led to utilization of intraoral molar distalizing appliances. The purpose of this study was to investigate dental and skeletal effects of Bonded Molar Distalizer (BMD) which is a simple molar distalizing appliance.Materials and Methods: Sixteen patients (12 girls, four boys) with bilateral half-cusp class II molar relationship, erupted permanent second molars and normal or vertical growth pattern were selected for bilateral distalization of maxillary molars via BMD. The screws were activated every other day, alternately. Lateral cephalograms and study models were obtained before treatment and after 11 weeks activation of the appliance.Results: Significant amounts of molar distalization, molar distal tipping and anchorage loss were observed. The mean maxillary first molar distal movement was 1.22±0.936 mm with a distal tipping of 2.97±3.74 degrees in 11 weeks. The rate of distal movement was 0.48 mm per month. Reciprocal mesial movement of the first premolars was 2.26±1.12 mm with a mesial tipping of 4.25±3.12 degrees. Maxillary incisors moved 3.55±1.46 mm and tipped 9.87±5.03 degrees mesially. Lower anterior face height (LAFH) decreased 1.28±1.36 mm.Conclusion: BMD is appropriate for distalizing maxillary molars, especially in patients with critical LAFH, although significant amounts of anchorage loss occur using this appliance.

Objective: The goal of this study was to evaluate primary school teachers’ knowledge regarding emergency management of avulsed permanent incisors.Materials and Methods: The study was conducted in fifty randomly chosen primary schools from Casablanca, Morocco. All teachers of the selected schools were included in the study. The data were collected by self-administered questionnaires. The questions focused on the teachers’ general characteristics, experience of avulsed teeth and the importance of emergency management. The data were analyzed using chi square test.Results: A total of 501 teachers, of which 23.6% were male and 75.4% were female, answered the questionnaire. The results showed that 44.5 % of the teachers had an experience of avulsed tooth at school, 82.82% of them knew the importance of emergency management and 32.6% would look for a dentist for treatment of the cases. Only 15.8% would reimplant the tooth themselves. Regarding the storage media, 21.95% would keep the avulsed tooth in milk. There was no significant difference between gender and education level (p>0.05).Conclusion: This study shows school teachers’ lack of knowledge regarding dental trauma and especially tooth avulsion. Therefore, the results indicated that educational programs are necessary for improvement in their level of knowledge.

Objective: One of the major problems of all ceramic restorations is their probable fracture against the occlusal force. The aim of the present in-vitro study is was to compare the effect of two marginal designs (chamfer & shoulder) on the fracture resistance of zirconia copings, CERCON (CAD/CAM).MATERIALS AND METHODS: This in vitro study was done with single blind experimental technique. One stainless steel dye with 50’ chamfer finish line design (0.8 mm depth) was prepared using milling machine. Ten epoxy resin dyes were made, The same dye was retrieved and 50' chamfer was converted into shoulder (1 mm).again ten epoxy resin dyes were made from shoulder dyes. Zirconia cores with 0.4 mm thickness and 35mm cement Space fabricated on the 20 epoxy resin dyes (10 samples chamfer and 10 samples shoulder) in a dental laboratory. Then the zirconia cores were cemented on the epoxy resin dyes and underwent a fracture test with a universal testing machine (GOTECH AI-700LAC, Arson, USA) and samples were investigated from the point of view of the origin of the failure.RESULT: The mean value of fracture resistance for shoulder margins were 788.90±99.56 N and for the chamfer margins were 991.75±112.00 N. The student’s T-test revealed a statistically significant difference between groups (P=0.001).CONCLUSION: The result of this study indicates that marginal design of the zirconia cores effects on their fracture resistance. A chamfer margin could improve the biomechanical performance of posterior single zirconia crown restorations. This may be because of strong unity and round internal angle in chamfer margin.

Objective: Low quality of the bone and insufficient bone due to the size of the sinus and resorption of the alveolar ridge decrease the long-term survival of implants in the posterior maxilla compared to other regions of the jaws. Surgical procedures to increase bone volume make it possible to place implants longer than 8 mm. In this situation sinus elevation makes it possible to place implants. We intend to evaluate peri-implant bone loss and survival of implants placed in elevated sinuses after 2 years and to compare with implants placed in the native posterior maxilla.Materials and Methods: Twenty-five implants placed in sinuses that had been reconstructed with Bio-Oss and healed after 9 months were compared with 30 implants placed in the posterior maxilla without any surgery. The groups were compared using probing pocket depth, bleeding on probing, Plaque Index and bone loss immediately after implant placement surgery and 2 years postoperatively. The criterion for implant survival was presence or absence of the implant in the oral cavity, which was recorded in relevant forms in both groups.Results: Three implants were lost; one in control and two in grafted sinuses. No significant differences were observed in the survival rates. In general, the mean bone loss around intrasinus and extrasinus implants was not significantly different. In the same context, no differences were observed between bleeding on probing, Plaque Index and probing pocket depths of two groups (P=0.397, P=0.637 and P=0.224, respectively).Conclusion: The survival and bone loss around intrasinus and extrasinus implants are similar.

Objective: To study the in vitro color changes of three dental resin veneering materials when immersed in tea, coffee and tamarind extracts.Materials and Methods: The color changes of heat polymerized tooth colored acrylic resin (Stellondetrey, B, F14, DPI Dental products of India Ltd, Mumbai), auto polymerized tooth colored acrylic resin (DPI, B, QV5, DPI Dental products of India Ltd, Mumbai) and light polymerized resin composite (Herculite XRV, Enamel A2, part no.22860, lot no. 910437, Kerr Corporation, West Collins Avenue, Orange, CA, USA) when immersed in water extracts of tea (Tata Tea Ltd. Bangalore, India), coffee (Tata Coffee Ltd. Coorg, India) and tamarind were evaluated using computer vision systems. The color images were recorded in R (red), G (green) and B (blue) form and converted into H (hue), S (saturation) and V (value).Results: Significant color change occurred for auto polymerized tooth colored acrylic resin in tamarind extract, for heat polymerized tooth colored acrylic resin in tea extract and for light polymerized resin composite in coffee extract. Auto polymerized tooth colored acrylic resin samples showed an overall higher color change. However, for all the material samples coffee extract produced more color change.Conclusion: These results suggest that the color stability of the resins is influenced by the presence of secondary metabolites such as tartaric acid, tannins, caffeine, saponins and phenols in tamarind, tea and coffee extracts.

Children suffering from decreased renal function may demand unique considerations regarding special oral and dental conditions they are encountered to. It is mentioned that renal function deterioration may affect the hard or soft tissues of the mouth. Having knowledge about the high prevalence of dental defects, calculus, gingival hyperplasia, modified salivary composition and tissue responses to the dental plaque may aid the physician and the dentist to help nurture the patient with chronic renal failure through the crisis, with an aesthetically satisfying and functioning dentition.

Mandibular defects may result from many conditions such as trauma, inflammatory diseases and tumors. There are rare cases reported in the literature that have demonstrated spontaneous bone regeneration after resection of the mandible. Several factors such as age, preservation of the periosteum and genetics seem to influence spontaneous bone regeneration capacity in individuals. Evaluation of these factors may lead to a better understanding of the mechanism of spontaneous bone regeneration and also help to create new methods for bone reconstruction. The purpose of this article was to describe the spontaneous regeneration of the hemi-mandible with a well-shaped condyle and coronoid after resecting a mandibular pathologic lesion in a young man.