Journal of Health and Safety at Work
Year:2015 | Volume:5 | Issue:3|Papers Count:8

Introduction: Occupational accidents are of the main issues in industries. It is necessary to identify the main root causes of accidents for their control. Several models have been proposed for determining the accidents root causes. FTA is one of the most widely used models which could graphically establish the root causes of accidents.The non-linear function is one of the main challenges in FTA compliance and in order to obtain the exact number, the meta-heuristic algorithms can be used.Material and Method: The present research was done in power plant industries in construction phase. In this study, a pattern for the analysis of human error in work-related accidents was provided by combination of neural network algorithms and FTA analytical model. Finally, using this pattern, the potential rate of all causes was determined.Result: The results showed that training, age, and non-compliance with safety principals in the workplace were the most important factors influencing human error in the occupational accident.Conclusion: According to the obtained results, it can be concluded that human errors can be greatly reduced by training, right choice of workers with regard to the type of occupations, and provision of appropriate safety conditions in the work place.

Introduction: Road accidents are of the most important events, which cause death and injury of a large number of people and impose huge economic losses. According to previous studies, human factors are the main cause of traffic accidents. The purpose of this study was to investigate the role of behavioral factors in driving-related non-fatal accidents.Material and Method: The present analytical study was carried out among 150 drivers of urban and suburban transportation system in Yazd province. The research tool was Driver Behavior Questionnaire (DBQ) which is consisted of two sections: demographic information and driving behavior.Result: 83.9 % of the participants reported to use safety belt nearly always. The highest deliberate violations, slips, and mistakes were belonged to drivers with age group of 18-25. Moreover, deliberate violations had a significant relationship with rage (P<0.05). Survey of behavioral factors in terms of vehicle ownership type showed that “deliberate violations” and “slips and mistakes” high among personal bus drivers and state-owned bus drivers, respectively, which shows the significant association between these behavioral factors and ownership type. What is more, rates of deliberate and unintentional violations and slips were higher among those with a history of two times incidents (P<0.004).Conclusion: The results revealed that behavioral factors such as age, type of vehicle ownership, and accident history played a significant role in occurrence of traffic accidents.

Introduction: Vehicle engine id one of the main sources of noise which its level is influenced by various parameters. The aim of this study was to investigate the impact of motor oils quality before and after oil change on the variability of vehicle engine induced noise level. In this study it is tried to follow-up the efficacy of motor oil quality on engines sound level.Material and Method: First, engine noise of 94 vehicles were recorded for 30 seconds before and after oil change and all the vehicles technical information including mileage, type of motor oil, and type of vehicle were registered. Following, the recorded noises were calibrated in semi-anechoic chamber and the sound pressure levels were measured with A and C-weighting network and main octav bands, using a sound level meters. The obtained results analyzed using SPSS software version 17.Results: The effects of motor oil quality on different noise levels of engines were determined and a significant reduction in noise level of vehicles engine was observed. Investigation of the relationship between mileage and motor oil quality on various engines sound level manifested that vehicles with mileage ranged 100000-150000 miles had significant reduction in their sound pressure levels in comparison with other vehicles.Conclusion: The results revealed that engine oil is among factors reducing the vehicle engine induced noise level. Moreover, the engine oil type and the vehicle mileage are key variables which determine the impact of engine oil quality on reduction of the sound level of vehicles engine.

Introduction: Polycyclic Aromatic Hydrocarbons (PAHs) belong to one of the groups of persistent organic pollutants (POPs) which are the result of incomplete combustion of organic materials, volcanic eruptions and forest and agricultural fields’ fires in the environment. However, human factors are main source of these pollutions. Nowadays, these compounds are among the main concerns related to the pollutants which, can easily enter into the land and water systems. Absorption of aromatic hydrocarbons and poly-aromatic molecules on the surfaces of carbon nano-tubes (CNTs) have increased in recent years. In this study, absorption of phenanthrene (as a representative of aromatic hydrocarbons groups) on multi-walled carbon nano-tubes was investigated in organic environment.Material and Method: All experiments were performed in a laboratory environment with a temperature of 24±2.Different variables including the type of solvent, solvent volume, pH of the environment, the absorption time of optimal phenanthrene concentration, and the highest removal efficiency under optimized parameters were obtained. Samples were analyzed using HPLC.Result: Findings showed that methanol with the volume of 10 ml, and the absorption time of 1.5 hours and 1.3 ppm concentration had the maximum absorption efficiency. Environmental pH had no effect on the absorption efficiency.Conclusion: Multi-walled carbon nano-tubes have high absorption capacity for the absorption of phenanthrene. Moreover, in an organic environment, the level of phenanthrene absorption on multi-walled carbon nano-adsorbent was more than 90% and according to the material used was 92%. Day-to-day and within-day reproducibility confirmed the mentioned results.

Introduction: In Laboratory accusations a wide range of hand-held tools are used due to nature of their work. Long-term and repeated use of these tools has led the laboratory workers to suffer from upper limb disorders. The present study was designed and implemented with the aim of investigating the usability of different models of pipettes used in the laboratories of the Tehran University of Medical Sciences, employing subjective assessment methods for selecting the best pipette models.Material and Method: This cross-sectional and analytical-descriptive study was performed among 35 laboratories employees of Tehran University of Medical Sciences. First, four models of the widely used pipettes were selected and their usability-related characteristics were investigated by a visual analog scale (VAS). Judgments concerned the usability of the pipettes done based on the criteria provided by the International Organization for Standardization 9241-11 (1998) and 20282-2 (2006). Data analysis was performed, using SPSS software version 22.Result: The overall evaluation of the users in relation to the characteristics of the pipettes indicated that the highest VAS score was belonged to pipette A, C, and D, respectively. Furthermore, pipette B was selected as the most undesirable one by users. Results related to the usability criteria of pipette showed that of the four models of study pipettes, pipette A has been ranked first in two criteria (satisfaction and effectiveness). Regarding the efficiency, the first rank was for C pipette and the second rank was for pipette A. Pipette B obtained the lowest scores for all given criteria.Conclusion: Shorter and lighter pipettes, which were designed according to ergonomic principles, had greater usability from the perspective of users and it could cause a better subjective assessment comparing to the other models.

Introduction: Installation of wind turbines in residential areas due to their unique sound characteristics may cause noise annoyance. Noise annoyance can increase the risk of health problems and sleep disturbance. Thus, this study was conducted to assess the effect of wind turbine noise annoyance on sleep disturbance among the Manjil wind farm workers.Material and Method: All the Manjil wind farm workers have been divided into three groups according to their noise exposure levels, including maintenance, security, and administrative workers. The equivalent A weighted noise levels were measured for each of the study working groups, using ISO 9612 standard method. Information related to the noise annoyance and sleep disturbance were determined by ISO15666 standard and the Epworth Sleepiness Scale, respectively. Data were analyzed using R software.Result: Findings of ANOVA and Kruskal-Wallis statistical tests showed that noise annoyance and sleep disturbance were statistically different among workers with various occupational, age, and work experience groups. Also, noise annoyance and sleep disturbance had a significant association in a way that regardless of the effects of other variables, it can be stated that for every one unit increase in noise annoyance, 0.26 units will be added to the amount of sleep disturbance.Conclusion: In this study, workers with more wind turbine noise annoyance had more sleep disturbance. Therefore, in addition to the direct effects of noise on sleep disturbance, it can indirectly exacerbate sleep disturbances.

Introduction: Heat is one of the hazardous physical agents in the workplace. Exposure to heat and consequent thermal stress influence workers productivity in addition to adverse health effects. The aim of this study was to determine the heat stress induced productivity loss related to different tasks of farmers in Darreh Shahr city, during summer.Material and Method: This cross-sectional study was conducted in summer, 2014, among farmers in Darreh Shahr city. After determining the sample size, farmers’ activities were determined using hierarchical task analysis (HTA), and WBGT measurements were done according to the ISO7243. Metabolism was estimated by the ISO8996. Following, the type of activities were identified according their required metabolism. Knowing WBGT and workload and using the work capacity model, the productivity loss in different tasks and ultimately total productivity loss were calculated.Result: The mean WBGT activities for plowing, terracing, planting seeds, watering, fertilizing, weeding, spraying, and harvesting were 29.98oC, 31.28oC, 30.66oC, 31.39oC, 31.99oC, 31.75oC, 31.08oC, and 30.3oC, respectively. WBGT values were higher than the permissible level provided by ISO7243 in all farming activities. Maximum value of WBGT was belonged to fertilizing activity (31.99oC) and the lowest value was for plowing (29.98oC). ANOVA test results did not show a significant difference in WBGT at head, waist, and ankle height. The highest and lowest amount of productivity loss was estimated respectively for weeding and plowing activities. The total productivity loss for farming was calculated 69.3 percent in an hour which is due to high physical activity, working outdoor, with exposure to direct solar radiation, and consequent heat stress imposed to workers.Conclusion: Productivity is a factor which is affected by the workplace heat stress. According to results of the present research, the amount of productivity is reduced in different tasks due to heat and this reduction is exacerbated by increase in temperature and might impact the local economy. Thus, further studies are needed to improve the working conditions.

Introduction: Work-related accidents may cause damage to people, environment and lead to waste of time and money. Health, Safety and Environment Management System has been developed in order to reduce accidents. This study aimed to investigate the effect of implementation of this system on reduction of the accidents and its consequences and also on the safety performance indices in Kermanshah Petrochemical Company.Material and Method: In this study, records of accidents were collected by OSHA incident report form 301 over 4 years. Following, the mean annual accidents and its consequences and safety performance indices were calculated and reported. Then, using statistical analysis, the impacts of two years implementation of this system on the accidents and its consequences and safety performance indices were evaluated.Result: The results showed that the implementation of HSE system was significantly correlated with Frequency Severity Indicator, Accident Severity Rate, lost days, minor accidents and total incidents (P-value<0.05). Moreover, the values of these variables have been reduced after implementation of this system. However, the system did not influence the Accident Frequency Rate and disabling accidents (P-value>0.05).Conclusion: The implementation of Health, Safety and the Environment Management System caused a reduction in accidents and its consequences and most of the safety performance indices in the entire process cycle of Kermanshah Petrochemical Company. Overall, safety condition has been improved considerably.