Journal of Health and Safety at Work
Year:2014 | Volume:4 | Issue:3|Papers Count:8

Introduction: Gasoline is a complex mixture of more than 500 various hydrocarbons. The elimination of lead from petrol has been associated with the production of significant amounts of hepatotoxic and nephrotoxic monocyclic aromatic hydrocarbons such as benzene, toluene and xylene (BTX). The main purpose of this study was to ascertain whether or not exposure to unleaded petrol, under normal working conditions, is associated with any hepatotoxic or nephrotoxic response.Material and Method: This was a retrospective cohort study in which 200 subjects with current exposure to unleaded petrol working in Shiraz petrol stations as well as 200 unexposed employees were investigated. Using standard methods, atmospheric concentrations of BTX were measured. Additionally, blood and urine samples were taken from subjects for routine biochemical tests of kidney and liver function.Result: The geometric means of airborne concentrations of BTX were found to be 0.24, 0.37 and 0.64 ppm, respectively. The result of blood chemistry tests showed that means of direct bilirubin, ALT, AST, urea and plasma creatinine were significantly higher in exposed subjects than in unexposed employees, although all of these parameters were in the normal range. Conversely, serum albumin, total protein and serum concentration of calcium and sodium were significantly lower in petrol station workers than in their unexposed counterparts.Conclusion: The average exposure of petrol station workers to BTX is lower than the current TLVs for these chemicals. However, clinical significance and long-term results of observed changes in liner and kidney of exposed workers needs more evident in comparison with unexposed group.

Introduction: The Power plants are as the major industries that have a large number of workers, providing they health is important. Exposure to occupational noise is the pervasive physical agent in industries like power plants and may impact health and for safety status for people. Determination of the sources of noise in workplaces is important step in noise control plans. This study aimed to assess noise pollution and determine the main sources of noise in a power plant for.Material and Method: This descriptive cross-sectional study was conducted on the ground floor of the turbine unit of a thermal power plant. Measurements was done based on the ISO-9612 and ISO-11200 standard using by the calibrated sound level meter model TES-1389 on “A” frequency weighting and “Slow” mode for time response. Surfer V.10 software was used for interpolation and noise maps producing. Based on grid method measuring for indicating of noise propagation, we set buffer of danger areas to determine main sources of noise. Also, we used the minimized grid method for measuring and study of noise denotation in vertical surface in each main source.Result: The results showed that the measured indoor sound pressure level in all areas where at the risk category of the units. The highest average sound pressure level was belonged to the unit 2, with 93.1 dB (A). We find the feed water pumps were the main sources in all of the studied units. Among the four main components of the main sources, the highest noise levels associated with the main pump and the gearbox section with about 100 9B (L) and dominant frequency of 2000 Hz.Conclusion: Considering that feed water pumps had major sources in indoor power plant noise pollution, engineering noise control such as providing enclosures is necessary to reduce noise pollution to safe levels in the studied plant it is necessary.

Introduction: The most common standards being used for predicting the health risks of whole body vibrations are ISO 2631- and BS 6844, presenting frequency weighting anfd different coefficients for different sensivities in variuse axes. In yhis study, vibration was measured about 900 minutes on 9 trains in one of the active lines of tehran metro with the aim of comparing the mentioned standards in evaluating whole body vibation.Material and Method: In this research, in addition to evaluation of different kinds of vibration indicators, the differences of ISO 26331-1 and BS 6841 Standards have also been investigated. The amounts of r.m.s., vibration dose and daily vibration dose were measured in x, y and z axes for drivers seat and x axis for drivers back rest separately according to the instruction of the two standards.Results: The mean calculated values of r.m.s and vibration dose on a basis of 135 6841 standard were lower than those values calculated according to ISO 2631 standard. Moreover, the results showed that 3 cases, based on the ISO standard, had risk level of higher than 17 m/s1.75 and 3 cases, had risk level of higher than 15 m/ s1.75 value, provided by BS 6841.Conclusion: Calculation according to the ISO 2631-1 standard show higher values. Indeed, ISO 2631-1 can provide a more secure criterion company to BS 6841, although the 15 m/s1.75 in BS is lower than the highest level of health guidance caution zone in ISO. Additionally, the association between r.m.s and vibration dose values in ISO 2631 is relatively lower than this association in BS 6841.

Introduction: Emergency situations are of the major challenges in industries. Understading the status of inter-team interaction is effective in improvement of emergency response team (ERT). The purpose of this study was to investigate the interaction space of ERP in a refinery, using the social network analysis (SNA).Material and Method: In the present case study, the density indicator was used to examine the interaction space in the ERT. The obtained data were analyzed, employing UCINET 6.0 social network analysis program.Result: The findings showed that the ERT has the relatively low concentration with the density of 0.2 overall, the result reflect a low level of interactions among response reams at emergency situations management.Conclusion: The presented approach provided an appropriate image of interactions network among the emergency response teams. The social network analysis can be used for assessing the interactions of the emergency response teams.

Introduction: One of the factors influencing on indoor air quality of the buildings is performance of HVAC (heating, ventilation, and air conditioning) systems. These systems supply clean and odorless air, with temperature, humidity, and air velocity within comfort ranges for the residents. The aim of this study was to evaluate performance HVAC system in an administrative building in Tehran.Material and Method: A questionnaire, developed in their research was used to assess the building occupants’ perception about the performance of HVAC system. To evaluate the performance of HVAC systems, air velocities were measured in the diffusers using a thermal anemometer. Moreover, CO2 concentration, air temperature and relative humidity were measured in the whole floors of the building. Air distribution inside the building was evaluated using smoke test.Result: Most of the studied people complained about the direction of airflow, thermal conditions and cigarette odor. The highest level of carbon dioxide was measured at 930 ppm inside the restaurant. The maximum and minimum air temperatures and relative humidity were measured 28.3-13.8° C and 28.4-23% respectively. Smoke test showed that the air distribution/direction wasn’t suitable in one third of air diffusers.Conclusion: Improper air distribution / direction were the main problem with the studied HVAC system which could be corrected by adjusting and balancing of the system.

Introduction: Statistical Report of the Social Security Organization indicates that among the various industries, the construction industry has the highest number of work-related accidents; so that in addition to frequency, it has high intensity, as well. On the other hand, a large number of human resources are working in this whish shows they necessity for paying special attention to these workers. Therefore, risk assessment of the safety in the construction industry is an effective step in this regard. In this study, a method for ranking safety risks in conditions of low number of samples and uncertainty is presented, using gray multi-criterion decision-making.Material and Method: In this study, we first identified the factors affecting the occurrence of hazards in the construction industry. Then, appropriate for ranking the risks were determined and the problem was defined as a multi-criterion decision-making. In order to weight the criteria and to evaluate alternatives based on each criterion, gray numbers were used. In the last stage, the problem was solved using the gray possibility degree.Result: The results show that the method of gray multi-criterion decision-making is an effective method for ranking risks in situations of low samples compared with other methods of MCDM.Conclusion: The proposed method is preferred to fuzzy methods and statistics in uncertain and low sample size, due to simple calculations and no need to define the membership function.

Introduction: Job design approach is one of the significant concepts in ergonomics Experts believe that integration of macro ergonomics and job design can lead to improved productivity in the organizations. Therefore, this study examined the relationships between job design, performance and job satisfaction.Material and Method: This cross - sectional study was done in 11 branches of one of the bank in Hamadan. Job Design Questionnaire, Job Satisfaction Questionnaires and Bank Performance Indicator were used in order to collect data. Spearman correlation coefficient was used for determining the correlation between each two variables.Result: This study showed that the motivational approach was the minimum approach (3.8%), and the mechanical approach was the dominant approach (74.7%) in the study branches and the majority of branches had an average level of job satisfaction. Moreover, there was a significant positive correlation between job design (motivational and cognitive approaches) and job satisfaction. In addition, the results showed that between job design (Motivational approach) and satisfaction were significantly correlated with performance, (p=0.05).Conclusion: Regarding the role of job design in job satisfaction and employees, performance, it can be stated that job redesign towards a motivational approach and considering the principles of ergonomics in the workplace, can play an important role in efficiency and productivity of an organization.